How to Check CPU Temperature on Windows 10 and 11 (Easy Methods)

Your CPU runs hot. That’s just a fact. But there’s a big difference between “normal hot” and “about to throttle itself into a slideshow” hot. PCs that randomly crash mid-game, slow to a crawl for no obvious reason, or just switch off out of nowhere? High CPU temps are a common culprit. Catching it early saves you from real hardware damage down the line.

Here’s the annoying part though. Windows 10 and 11 don’t show you CPU temperature anywhere obvious. Not in Settings, not in the Control Panel. Task Manager on newer Windows 11 builds does show a temperature reading under the Performance tab, but that’s your GPU, not your CPU. So you’re basically flying blind unless you know where to look.

Good news is there are solid ways to check it, and most of them are free. This guide covers checking temps through BIOS without any software, plus four free tools that give you real-time readings while Windows is running. You’ll get what the numbers actually mean too, and some practical fixes if your chip is cooking itself.

Quick-Reference: CPU Temperature Basics

Here are the key details at a glance before diving in:

Detail Info
OS covered Windows 10 and Windows 11
Built-in Windows display Not in Settings; Task Manager shows GPU only
BIOS/UEFI access Shows CPU temp without booting into Windows
Best free tools HWMonitor, Core Temp, HWiNFO64, MSI Afterburner
Normal idle temp 30C to 50C (86F to 122F)
Normal load temp 60C to 85C (140F to 185F)
Danger zone Sustained 90C+ means throttling is likely
Mac users Try iStatMenus or Intel Power Gadget

Why Windows Doesn’t Show CPU Temperature by Default

It feels like a pretty basic thing to show, right? But Microsoft has never added a CPU temp readout to Windows Settings. There’s no “Hardware Health” page, no thermal monitor tucked away in a menu. Nothing.

Task Manager does show some hardware stats under the Performance tab. On newer Windows 11 builds you can sometimes spot a GPU temperature there, but that’s it. The CPU section shows usage, speed, and process count, not temperature. So if someone told you to just open Task Manager to check your CPU temp, they were thinking of the GPU by mistake. It’s an easy mix-up.

So yeah, you’re stuck either restarting into your BIOS firmware or downloading a third-party app. Not complicated though. Either route takes a couple minutes once you’ve done it before.

Method 1: Check Your CPU Temperature Through BIOS/UEFI

Your motherboard has its own firmware (BIOS or UEFI) that loads up before Windows even starts. Most of them have a hardware monitor page tucked in there somewhere showing CPU temperature, fan speeds, voltages. No software needed at all. Good for a sanity check after you’ve just built a PC or pulled the cooler off and put it back on.

How to Get Into BIOS on Windows 10/11

Two ways in. You can restart and hit a key over and over during the manufacturer’s splash screen. Which key? Depends on your board. Delete works for most ASUS and MSI boards. F2 for a lot of Dell and Lenovo machines. F10 for some HP systems. Or you can do it from Windows itself: go to Settings, then Update and Security (Windows 10) or System (Windows 11), find Recovery, and look for Advanced Startup. That lets you restart straight into UEFI Firmware Settings without guessing the right key.

Finding the Temperature Readout in BIOS

Once you’re in, poke around for a tab called Hardware Monitor, PC Health Status, or just Monitor. It’s named differently depending on who made your board (ASUS calls it “Monitor,” Gigabyte calls it “PC Health Status,” and so on). CPU temperature will be listed there. One thing to keep in mind: since Windows isn’t running, this reading is always an idle reading. You won’t see load temps here.

Here’s the process step by step:

  1. Save anything open and restart your PC.
  2. Press Delete, F2, or F10 repeatedly as soon as the startup screen appears.
  3. Use your keyboard to find the Hardware Monitor, PC Health, or Monitor section.
  4. Read the CPU Temperature value shown on screen.
  5. Press F10 to save and exit, or just Escape if you didn’t change anything.

Method 2: How to Check CPU Temp with HWMonitor

HWMonitor is made by CPUID and it’s one of the most popular free monitoring tools out there. It shows every sensor on your system, including current, minimum, and maximum values. That max column is really useful because it catches spikes you might have missed.

Hardware monitor window displaying fictional CPU temperature sensor readings

Installing and Reading HWMonitor

Download it from the CPUID website (cpuid.com), run the installer, and open it up. The interface looks a bit busy at first but you get used to it fast. Here’s how to read it:

  1. Download the free version from cpuid.com and run the installer.
  2. Open HWMonitor after installation.
  3. Scroll down to your CPU’s entry, listed by processor name.
  4. Find the Temperatures section under your CPU and look for Package (the overall CPU temp) and individual Core readings.
  5. Check the Value column for the current reading, and note the Min and Max columns.
  6. Run a game or a stress test for a few minutes, then check the Max column to see your peak load temperature.

Method 3: Monitor CPU Temperature Using Core Temp

Core Temp is the most beginner-friendly option on this list. It’s a small program, opens fast, and gives you a clean single window with per-core temperatures. It also shows your processor’s Tj. Max, which is the maximum safe temperature Intel or AMD has rated your specific chip for.

Setting Up Core Temp for Real-Time Readings

One heads-up before installing: Core Temp bundles extra software by default. Read every screen during setup and uncheck anything you don’t want. It’s not harmful, just annoying if you miss it.

  1. Download Core Temp from alcpu.com.
  2. Run the installer and uncheck any optional bundled software when prompted.
  3. Open Core Temp. Your processor model shows at the top.
  4. Read the Core 0, Core 1, etc. values for per-core temperatures.
  5. Check the Tj. Max value. Take your current temp away from that number to see how much headroom you’ve got.
  6. Want it running all the time? Go into Options and enable “Start Core Temp with Windows” so it sits quietly in your system tray.

Method 4: Use HWiNFO64 for Deep CPU Temperature Data

HWiNFO64 is the one for people who really want to dig in. It shows granular sensor data including CPU die average, distance to Tj. Max, VRM temperatures, and more. And it can log all of that to a CSV file, which is great for going back over temps after a long gaming or rendering session.

Running HWiNFO in Sensors-Only Mode

Grab HWiNFO64 as a portable download from hwinfo.com. No install needed. Just extract and run the exe.

  1. Get HWiNFO64 from hwinfo.com (the portable version doesn’t need installing).
  2. Open it up and tick “Sensors-only” on the startup dialog, then hit Run.
  3. Scroll to the CPU section in the sensor window, usually labeled CPU [#0].
  4. Watch the CPU Tdie or CPU Package value for core temperature.
  5. Use the Log to CSV button at the bottom to record temps across a work or gaming session.

Method 5: Check CPU Temperature via MSI Afterburner

Afterburner is mainly a GPU overclocking and monitoring tool, but it can pull CPU temperature data too. The real reason gamers use it for this is the on-screen display overlay, which shows temps right in the corner while you’re playing.

Adding CPU Temperature to the Afterburner Overlay

  1. Download MSI Afterburner from msi.com (search for the Afterburner landing page).
  2. Open it and click the Settings gear icon.
  3. Go to the Monitoring tab.
  4. Scroll through the graph list and find CPU Temperature.
  5. Tick “Show in On-Screen Display,” then click Apply.
  6. Launch a game. Your CPU temp appears in the overlay during play.

What Your CPU Temperature Numbers Actually Mean

Numbers without context aren’t much help. Here’s what to make of what you’re seeing.

Temperature range chart showing safe and critical CPU heat zones

Normal Idle and Load Temperature Ranges

Idle means your PC is sitting at the desktop with nothing demanding running. Under load is when you’re actually pushing the CPU. Gaming, rendering video, running something like Cinebench or Prime95. Laptops almost always run hotter than desktops too, because everything is crammed together and the coolers are tiny by comparison.

Quick reference: 30C to 50C at idle is totally fine. 60C to 85C under load is normal. Hitting 90C or above on a regular basis during everyday tasks? That’s a problem you need to deal with.

How to Tell If Your CPU Is Overheating

Honestly, the symptoms are pretty obvious once you’ve seen them. Your CPU throttles itself (slows down on purpose) to shed heat. So your game suddenly drops frames, or a video render that should take 10 minutes drags on for 20. Random crashes and blue screens can show up too. In bad cases the PC just shuts off completely to protect itself. All of these can trace back to sustained high temperatures.

Comparison: Best Free CPU Temperature Tools at a Glance

Each tool has its own strengths, so here’s a side-by-side to help you decide:

Tool Best For Ease of Use Per-Core Data OSD Overlay Logging
HWMonitor General monitoring 4 out of 5 Yes No Yes
Core Temp Beginners 5 out of 5 Yes No Yes
HWiNFO64 Power users 3 out of 5 Yes Via plugin Yes
MSI Afterburner Gamers 4 out of 5 Yes Yes Yes
BIOS/UEFI No-software check 3 out of 5 No No No

What to Do When Your CPU Temperature Is Too High

High temps aren’t just bad luck. There’s usually a fixable cause. Work through these in order.

Step 1 – Clean Dust from Your CPU Cooler and Case Vents

Dust is basically insulation. It traps heat inside your cooler fins and case vents, making it impossible for warm air to escape. A can of compressed air aimed at the heatsink and all case vents usually makes a noticeable difference. Do this every few months.

Step 2 – Put Fresh Thermal Paste On

That paste between your CPU and cooler? It fills microscopic gaps so heat transfers properly. After 3 to 5 years it dries out and gets crusty. Wipe the old stuff off with isopropyl alcohol and a lint-free cloth. Put a small pea-sized dot of new paste on the center of the CPU. Remount the cooler. Done.

Step 3 – Check and Improve Case Airflow

The basic idea: fans at the front pull cool air in, fans at the back push hot air out. Simple. But if your cables are all over the place inside the case, they end up blocking that airflow more than you’d think. Tuck cables out of the main airflow path. Adding an extra case fan helps too if you have an empty bracket.

Step 4 – Get a Better CPU Cooler

Stock coolers (the ones that come in the box with some processors) do the job for normal use at stock speeds. But for high-TDP chips, overclocking, or long rendering sessions, they just can’t keep up. A tower air cooler like a Noctua NH-D15 or an AIO liquid cooler gives you way more cooling headroom than most stock options.

Common CPU Temperature Monitoring Mistakes to Avoid

Some common slip-ups that trip people up:

  • Checking temp at idle only. You need to test under real load. Run a game, render a video, or fire up a stress test like Prime95 to get a real number.
  • Glancing at current temp but not checking Max in HWMonitor or similar tools. You’ll miss spikes that way. Always look at Max after a session.
  • Panicking over short spikes. A brief hit of 90C during a quick single-threaded burst is very different from sitting at 90C for 20 minutes.
  • Confusing GPU temp with CPU temp. Task Manager’s temperature reading is GPU only. Don’t assume it represents your processor health.
  • Reseating a cooler and not checking temps afterwards. Pop into BIOS or open a monitoring tool right away to make sure the cooler is making proper contact.
  • Not reading the installer screens. Core Temp and some others try to sneak in extra software during setup. Click carefully.

Final Thoughts

BIOS works great for a fast one-off check when you don’t feel like installing anything. Core Temp or HWMonitor are solid for day-to-day monitoring. HWiNFO64 is what you want when you’re overclocking or chasing down a weird thermal issue. And for gamers, MSI Afterburner puts your temps right on screen so you never have to tab out.

30C to 50C at idle is fine. 60C to 85C under load is normal. Sitting at 90C or above? Something’s wrong.

Grab one of these tools, install it, and run a stress test for about 15 minutes. Seriously, that alone tells you more about your CPU’s thermal situation than guessing ever will. After that, just check in once a month and blow out the dust every so often.