Face ID not working usually means something is blocking the TrueDepth camera, a setting is switched off, or your face looks different from when you set it up. You grab your iPhone, look at it, and it just shows the passcode screen. Since you unlock your phone dozens of times a day, it gets annoying fast.
Here are the fixes I would try, beginning with the easy ones. Many people don’t need to get past the first three. If you’re seeing a message that Face ID has been disabled, there’s a section towards the end for that as well.
Why Is Face ID Not Working?
Face ID fails when the TrueDepth camera can’t get a clear read of your face. The camera at the top of your display projects a grid of invisible infrared dots onto your face and compares it to the one recorded at setup, so anything that gets in the way, or changes how your face looks to the camera, can cause a fail.
The common causes are:
- A dirty camera area, a thick case, or a screen protector covering the sensors
- A mask, sunglasses, or a hat covering part of your face
- Holding the phone too close, too far, or at an odd angle
- Face ID turned off for the feature you’re trying to use
- A big change in how you look, like a new beard or heavy makeup
- A software bug that a restart or update would clear
- Hardware damage to the TrueDepth camera, often after a drop
Quick Fix to Try First
Clean the top of your screen with a soft cloth, remove your sunglasses, and hold the phone directly in front of you at a normal distance. Then restart the iPhone. For many people, that’s all it takes to get Face ID working again.
How to Fix Face ID Not Working on iPhone
Try these in order and test Face ID after each one, so you know what actually fixed it.
1. Clean and Uncover the TrueDepth Camera
The TrueDepth camera sits in the notch or Dynamic Island, and even a light smudge can confuse it. Apple says to remove anything covering the camera, so check these three things:
- Wipe the notch or Dynamic Island area with a microfiber cloth.
- Take off your case if it wraps over the top edge of the screen.
- Test without your screen protector, especially if the problems started right after you put a new one on. Cheap protectors often have a badly cut notch area.
2. Check Your Face ID Settings

Sometimes Face ID works fine, but it’s switched off for the thing you’re trying to do. That’s common after restoring a backup or setting up a new phone, and it’s usually the cause if only one feature fails, like Apple Pay.
- Go to Settings > Face ID & Passcode and enter your passcode.
- Make sure Face ID is set up.
- Under Use Face ID For, turn on iPhone Unlock, iTunes & App Store, Wallet & Apple Pay, and Password AutoFill as needed.
3. Make Sure Your Face Isn’t Covered
By default, Face ID needs to see your eyes, nose and mouth. A mask, a scarf pulled up high, or a large hat can block enough of your face to make it give up.
If you wear a mask often, you can set up Face ID with a mask on iPhone 12 and later running iOS 15.4 or above. It looks more closely at your eye area, so keep your eyes clear and hold the phone a bit higher. Sunglasses are the other common problem. Some lenses block the infrared light Face ID uses, so if it works indoors but not outside, your sunglasses are the likely culprit.
4. Hold the Phone at the Right Distance and Angle
Face ID works best when your iPhone is 10 to 20 inches from your face, which is about arm’s length or a bit closer. Holding it right up to your nose, or way off to the side on a desk, makes it harder to read your face. Orientation also matters: iPhone 13 and later on iOS 16 or above can unlock in landscape, but older iPhones only work in portrait, so turn an older model upright and try again.
5. Set Up an Alternate Appearance
An alternate appearance lets Face ID recognize a second look without resetting everything. It helps after a noticeable change like shaving off a full beard, new glasses, or heavy stage makeup.
- Go to Settings > Face ID & Passcode.
- Tap Set Up an Alternate Appearance.
- Scan your face the same way you did the first time.
If someone else sets up the alternate appearance, they get full access to your phone, so keep that in mind.
6. Restart Your iPhone
A restart clears minor glitches that can stop the TrueDepth camera from responding. Press and hold the side button and either volume button until the power off slider appears, slide it, then wait about 30 seconds and turn the phone back on. You’ll be asked for your passcode once, which is normal. After that, lock the phone and try Face ID again.
7. Update iOS
Some iOS versions have Face ID bugs that Apple patches in the next update. Go to Settings > General > Software Update and install anything waiting, with your phone charged or plugged in.
8. Reset Face ID and Set It Up Again

If the fixes above didn’t work, your saved face data may be the problem. Clear it and start over:
- Go to Settings > Face ID & Passcode.
- Tap Reset Face ID.
- Tap Set Up Face ID and follow the steps on screen.
Do the new scan in decent lighting, without sunglasses, and move your head slowly in a full circle. A rushed or half-finished scan is one of the main reasons Face ID feels unreliable.
9. Check the “Require Attention” Setting
Require Attention for Face ID, found under Settings > Face ID & Passcode, makes sure your eyes are open and looking at the screen before unlocking. It’s a good safety feature, but it can cause trouble with certain sunglasses or if it’s hard for you to keep your eyes on the phone. Turning it off can help in those cases, though it makes your phone a bit less secure.
What If It Says “Face ID Has Been Disabled”?
A message like “Face ID is not available” or “A problem was detected with the TrueDepth camera” usually means a hardware issue, not a setting. It commonly appears after a fall, water damage, or a screen repair with non-genuine parts.
If setup keeps asking you to move your face into the frame and never finishes, or the camera doesn’t work at all, contact Apple Support or visit an Apple Store. According to Apple, the TrueDepth camera uses lasers and should only be repaired by trained technicians, because a bad repair can affect its safety features.
How to Keep Face ID Working Well
- Keep the top of the screen clean, especially after phone calls
- Pick a screen protector with a clean, well-cut notch area
- Set up Face ID with a mask if you wear one often
- Add an alternate appearance after a big change in your look
- Install iOS updates when they come out
- Use a sturdy case, since a hard drop can damage the TrueDepth camera
FAQs
Why does Face ID work sometimes but not always?
Changing conditions are usually the reason. Bright sunlight behind you, sunglasses, a mask, or a strange angle can make it fail now and then. If it’s random even in normal conditions, reset Face ID and scan again in good lighting.
Does Face ID work in the dark?
Yes. Face ID uses infrared light, so it can recognize your face even in a dark room. If it only fails in the dark, something else is going on, like your face being partly covered or the phone held too close.
Final Thoughts
Most Face ID issues come from something blocking the camera or your face, holding the phone at the wrong angle, or a setting that’s turned off. A quick wipe, a restart, and checking your Face ID settings fix it for most people. If it keeps failing, resetting Face ID and scanning again is the next best option.
When you see a message saying Face ID is disabled, don’t guess, just contact Apple Support, as it is probably a hardware problem. Has Face ID stopped working since you put on a new screen protector or case? Tell us in the comments what you’re using, it could save somebody else some trouble.